DINIO 7

Wiring Input/Output up to your SmartMotor™ is made simple with the DINIO7 breakout board. The DINIO7 has slots for 7 industry standard Opto Modules. This is a DIN rail mount adapter that allows the SmartMotor™ to easily interface to popular Input/Output blocks like those produced by manufacturers such as Gordos, Grayhill, Opto-22 and others. It can be used with either input or output modules. The DINIO7 has a 9 pin connector for direct connection to a personal computer serial RS-232 communications port and an AniLink™ network connector. It is also equipped with an expansion bus to allow it to interface with other Animatics DIN rail mount adapters.

Features
• DB-15 or screw terminal access to your SmartMotor™.
• AniLink™ port for expansion to other AniLink™ devices.
• 7 main I/O buses to cross connect I/O to other motors.
• 4 aux buses to interconnect encoders between motors.
• Differential encoder I/O expansion (optional).
• Jump-in RS-485 terminal resistors.
• On board DB-9 for fast RS-232 access.
• Easy din rail mount and screw terminal I/O hook-up.

Benefits
• Easy connection for panel environment.
• Cascadable.
• Flexible use.
• Simplifies encoder connections.
• Strong noise immunity.
• No added parts necessary for RS-485 termination.
• Uses standard cables.
• No screws needed for mounting.

Electrical:
• Power bus line voltage: 19V to 48VDC
• Isolated communications: 4.5V to 5.5V
Optional differential XCVR power: 90 mA typical

Mechanical:
Dimensions: see figure
Weight: 15 oz (425 g)