DINIO - RS485

The DINIO-RS485 is a DIN Rail mount, 16 24V optically isolated channel (8 inputs and 8 outputs), field addressable, expanded Input/Output board. It communicates over an optically isolated RS-485 network, and can be set to baud rates between 2400 and 38400 bps. Each DINIO-RS485 has 2 RJ-45 connectors as well as screw terminal access to allow easy connection of up to 102 blocks (816 inputs and 816 outputs) on a given RS-485 network. Communications are via standard PRINT1 commands on Com Port 1 of any SmartMotor™.

Capabilities include:
• Read an individual input (0 through 815) state
• Read an individual output state
• Set an output state to “ON” (sourcing) or “OFF.”
• Read all inputs and outputs on all Input/Output cards present
• Responses are global and are received by any and all SmartMotors on the RS-485 network.
• Selectable byte wide responses to array variables.
• Selectable single bit/channel responses to the variable z.
These capabilities allow for convenient event driven coding where only a specific input event is needed to trigger some other event across any SmartMotor™ on the bus.

Features
• 8 Inputs, sink/source user selectable.
• 8 overload protected sourcing outputs.
• +24 and/or ground rail connections on each channel.
• LED Indications include over-load fault, sink/source selection,
  and Input/Output channel status.
• Feed-thru Bus.

Benefits
• Byte read capability.
• Byte write capability.
• Input/Output devices are easily and conveniently wired.
• Diagnostics at a glance.
• Compatible with other Animatics DIN-rail mount bus products.

Electrical:
Module input voltage: 12V to 30VDC
Module input current: 200 mA with no outputs active
Nominal input current: 5.7 mA @ 24V
Max output current: 200 mA/channel or 650mA total

Mechanical:
Dimensions: see figure
Weight: 15 oz (425 g)