OPTO 1

Expanded I/O is just a step away with the OPTO1 AniLink™ interface adapter. The OPTO1 interfaces directly into industry standard 16 channel Opto racks allowing easy expansion into your machine design. This Adapter Card plugs into the industry standard I/O Module Rack such as OPTO22™, making the SmartMotor™ control the industry standard I/O module. The Adapter receives a DIN or DOUT command from the SmartMotor™ on the AniLink™ port and controls up to 16 digital modules on the rack as a group of 8 inputs or outputs. Each unit takes up 2 AniLink™ addresses (4 units max per motor). The adapter operates on +5 VDC that can be supplied by the SmartMotor™ through AniLink™ connection. The logic sides of the I/O modules on the rack must of +5 VDC. The adapter card does not support I/O modules that require more than 25 mA of input current. If other peripherals are drawing current from the SmartMotor™ and there is no room for the SmartMotor™ to supply +5 VDC for the rack, the user must ensure that the SmartMotor™ powers-up simultaneously with the rack power supply or earlier. If the rack powers up first, the device on the OPTO1 adapter may latch up, losing communication with the SmartMotor™.

Features
• Addressable expanded I/O interface card.
• Plugs into 50 pin header or edge card type Opto-Racks.
• 4 Opto-1 boards per motor gives you 64 channel expansion.
• Ties in with all other AniLink™ family devices.

Benefits
• Up to 4 OPTO racks can be controlled by 1 SV.
• Easy installation.
• Easy expandability.
• Broad compatibility.

Mechanical:
Dimensions: see figure
Weight: 15 oz (425 g)