• Enclosed linear unregulated power supplies
• PC-type AC power cord
• 4 pin AMP connector on output
• Internally fused on both primary and secondary side
• Toroid transformer for minimal voltage drop and minimal EMI

Includes 1, KITDC1- connector kits

• Provides protection against Back EMF
• Automatically gates on at >49 VDC
• 27 Ohm 100 Watt Resistance
• Connects in parallel with above enclosed power supplies
• Pin-out is same as enclosed power supplies
• Dimensions are same as enclosed power supplies

The SHUNT42V100W can be inserted between the DC power supply and the SmartMotor™ to monitor the power voltage. If the voltage exceeds the threshold, the shunt gates on to clamp the voltage to safe level.
This is designed for the 42V supplies but it can also be used for 24V supplies.

Includes 2, KITDC1- connector kits

Use with cable CBLDC1

PS42V20AF110 and 220, PS42V20AF110S1 and 220S1; PS75V6AF110* and 220, PS75V6AF110S1* and 220S1
*PS75V6AF power supplies work only with ServoStep products.

Open Frame linear unregulated power supplies

• 42 VDC output power supply is for use with all SmartMotors, 75 VDC output power supply is for use only with ServoStep products.
• Primary Side Fused
• Screw Terminal access to AC input and DC output
• Available in 110 VAC or 220 VAC input voltage
• Add the suffix S1 to include a 100 W, integrated shunt

• Provides protection against Back EMF
• Automatically gates on at >49 VDC
• 12.5 Ohm 100 Watt Resistance
• Connects to Capacitor of above Open Frame power supplies
• Will work with other Linear unregulated power supplies (consult factory)
• This unit will operate even on a loss of AC input power to the power supply