Speed Guide is shipped in standard goods assembled the No.1&3bearings, as a fix-axis

 Insert Eccentric nuts in nut holes on block.
-When it is hard to insert, it can be inserted if you use bearing bolt to push a eccontric nut in nut holes of block

After temporary-joint the bearing bolt in eccentric nut and inseting SGB in SGR, temporary-joint the eccentric adjust position.

Take out SGB which is adjusted temporary from SGR

In situation that eccentric temporarily-adjustment, joint the eccentric nut and bearing bolt by joint tork in the catalogue.

Insert SGB in SGR

In case of pre-load, turn the eccentric nut into clock opposite side over 90°

In situation fixing the eccentric adjust position, joint the eccentric nut and bearing bolt againby joint tork in catalogue

Insert SGB in SGR

Adjust the pre-load with turnig the eccentric nuts into clock direction in case of turning pre-load excessively, return No 6 in case of SGB having over four bearings, after adjust according to No 6 order, adjsut No 5 bearing's clearance according to same method

After pre-load adjust, check rolling motion in shaft face Ecentric nut's hole indicate the pre-load and in case of block having four bearings, what the eccentric nut keeps the regular direction means same pre-load,and it is good for life and load.