Home

 

Animatics SmartMotor™ SM2315DT (OEM series)

• All data derived under dynamometer testing using 48 VDC.
• Connector kits and cable options are available.
• External encoder input is not available
(including Mode Follow and Mode CAM)
• RS485 communication is not available through port E and F.
• Additional long term EEPROM variable data storage memory is optional.
• SmartMotor™ servos have CE and UL certification.

More technical specs »
Drawing »

To Follow

Click on the graphto enlarge
 DESCRIPTION  UNITS
SM2315DT
  Power Input VDC 20 - 48 (max)
 Environment Operating Temperature °F (°C) 32 to 158 (0 to 70)
Enclosure Rating (approximate) IP30
Storage Temperature °F (°C) -4 to 185 (-20 to 85)
Vibration (peak/continuous) G NA/NA
Humidity (non-condensing) % 0 to 80
 Performance Peak Torque (Tp) oz-in (N-m) 112 (0.79)
Continuous Torque (Tc) oz-in (N-m) 57 (0.40)
No Load Speed RPM 4700
Nominal Power HP (kW) 0.15 (0.11)
Servo Update Hz 4069
PWM Frequency kHz 33.3
Encoder Type Incremental VDC
  Resolution Post Quad 2000
Memory Volatile kRAM 32
  Non-volatile kRAM 32
 Motor Commutation   6-step Trapezoidal
Voltage Constant (Kv) V/kRPM 9.08
Torque Constant (Kt) oz-in/Amp
(N-m/Amp)		 12.28
Rotor Inertia (Jm) oz-in-s2
(10-5kg-m2)		 0.0010 (0.727)
Insulation   Class A
Number of Poles (Np)   8
Winding Resistance (R) Ohms 0.74
 Input/
 Output		 Type   7(5VDC TTL)

Input

 Digital   +5V TTL sinking input
  Analog   sinking input, 10 bit
Output Sourcing mA 5
  Sinking mA 10
Encoder/Step Input Freq. MHz 1
 Communications Primary Type   RS232; Serial (ASCII)
  Speed KBaud 2.4 to 38.4
Secondary Type   RS485; Serial (ASCII)
 Physical Radial Load lbs (kg) 7 (3.18)
Axial Thrust Load lbs (kg) 3 (1.36)
Width in (mm) 2.25 (57.2)
Length in (mm) 2.30 (58)
Weight (Wt) lbs (kg) 1.3 (0.61)
Shaft Diameter** in (mm) 0.25 (6.4)
Pilot Diameter** in (mm) 1.498 (38)
Bolt Circle Diameter in (mm) 2.625 (66.7)

Notes:
*  tested at RMS acceleration for 20 minutes
** check tolerance in drawings
Literature:
Drawings
Drawings
 
 
 
 
 
 
 
 
 
 
 
Required Items:
Power and
Communications Cable
DC power supplies
SMI2- Windows based
interface software

Optional Items:
   
Power and
Communications Cable
Communications adapter
Expansion module
Connector kits -
make your own cables
Gearheads
True contouring, CNC software

animatics logo

EURMotion is a factory authorized distributor of Animatics
in the UK, Ireland and Scandinavia.

Copyright © 2006 EURMotion Ltd. All rights reserved.